iGSMV4G - Resideo Honeywell Home Dual-Path Alarm Communicator (for VISTA-Series Control Panels)

iGSMV4G - Resideo Honeywell Home Dual-Path Alarm Communicator (for VISTA-Series Control Panels)
iGSMV4G - Resideo Honeywell Home Dual-Path Alarm Communicator (for VISTA-Series Control Panels)
Item# iGSMV4G

Please Note: The Honeywell iGSMV4G dual-path communicator (for VISTA-Series Panels) has been discontinued and replaced by the newer LTE-IV, LTE-IA or LTE-IC model number(s).

Honeywell iGSMV4G Alarm Communicator:

The Honeywell iGSMV4G is an dual-path (internet and cellular 3/4G) alarm communicator for Honeywell Vista-Series security systems. The iGSMV4G dual-path communicator transmits signals to the AlarmNet Control Center (via the internet or GSM cellular network), which in turn routes those signals to the AlarmClub central station. The cellular module in the AlarmNet iGSMV4G communicator is backwards compatible with 2G and 3G service. The trademarked "IntelliPath" feature enables the communicator to auto-select the optimum HSPA path, whether it is 2G, 3G, or 4G.

Basic features of the iGSMV4G include: 1) Full Contact ID reporting using ECP mode with Honeywell control panels (or when used along with a DCID/DCID-EXT)
2) Primary communication over internet. Uses HSPA+/UMTS/EDGE/GPRS as the backup to IP and SMS as a secondary or backup to the GSM path
3) Upload/download of compatible Honeywell control panels
4) Web-based programming using the AlarmNet Direct website, local programming with a 7720p program tool or panel pass-thru programming (panel revision dependent)
5) Remote services capability; optional Total Connect remote services
6) Two-way voice transport provides two-way voice over GSM (see note below)
7) Transformer (16.5VAC 40VA) and battery included NOTE: Two-way voice via Alarmnet 3/4G communicators require the AVS base station to be at revision 1.7 or higher. Two-way voice transport provides two-way voice over GSM via AlarmNet services when used with Honeywell's Audio Verification System (AVS). Your panel must support the AVS module in addressable mode for two-way voice over GSM.

Honeywell is focused on providing the best alarm communication solutions for the security industry. Alternative communication methods are critical in the marketplace due to VoIP, migration from POTS and global growth of digital networks. The Honeywell iGSMV4G communicator offers dual-path solutions with full data reporting and uploading/downloading for most Honeywell control panels. In addition, with onboard zone inputs and optional dialer capture capability, we're compatible with other manufacturers' security panels as well. Honeywell communication products and control panels combine to make installations faster and easier.

All signals are delivered to Honeywell's AlarmNet® Network Control Center, which routes the information to the AlarmClub central station. The state-of-the-art AlarmNet Network Control Center is fully redundant and monitored 24/7. AlarmNet has the ability to route messages using AlarmNet-i and 800 PLUS services, providing true redundancy and multi-path message delivery.

Transmission Protocols

Honeywell's IntelliPath™ Series communicators provide seamless, reliable coverage by automatically choosing the best signal in the area (whether 2G, 3G or 4G) and self-adjusting as necessary. The following wireless communication protocols are supported:
HSPA+ (4G )

Honeywell iGSMV4G Product Specifications:

Multi-GSM platform compability:  2G, 3G and 4G.

Full Contact ID or ADEMCO® High-Speed Reporting:  Contact ID reporting using ECP mode with compatible Honeywell control panels or combined with optional dialer capture for non-ECP capable control panels..

256-bit AES Encryption:  Advanced encryption standard used for secure communications.

Upload/Download:  Available with select Honeywell control panels. Requires Compass version or higher.

  Quick and easy installation of cellular communicator for VISTATM and LYNX controls.

Dynamic Signaling with Certain Honeywell Control Panels  Provides management of control panel dialer and digital cellular communicator. Programmable priority and delays determine signal path.

Diagnostic LEDs  Provide signal strength and status indications.

QOS  Quality of Service diagnostics via AlarmNet supply vital information including when a message was received, battery voltage, input voltage, signal strength and message path.

Web-Based Programming  Allows complete interactive programming from AlarmNet Direct.

Intelligent Supervision  Any message generated serves as a supervision message per optional 24 hour or 30 day intervals. This feature effectively limits required messages to be sent.

Remote Services Capability*  Optional Honeywell Total Connect® Remote Services value-added web-based or SMS system control as well as e-mail notification of system events. Not available with iGSMHS4G.

Two-way Voice Transport  GSM voice channel capable to allow two-way voice session in conjunction with an audio verification system (U.S. and Canada only).

Web-Based Programming  Allows complete interactive programming from AlarmNet Direct.

Line Security  Approved for line security applications with 200-second supervision intervals (iGSMHS4G).

*Service subscription required.

Honeywell iGSMV4G Product Compatibility:

• 1361
• 7626-5
• 7626-12
• 7626-50HC
• 7720P
• K14138LF
• K14139
• K1439LF
• K4668WH
• WA7626-CA
Q & A's :

comments powered by Disqus