PG9934P - DSC Wireless Encrypted Pet-Immune PIR Motion Detector with Integrated Camera (for PowerG Control Panels)
DSC PG9934P Product Description:
The DSC PG9934P is a wireless PowerG indoor PIR motion detector with integrated cameras and microphones for alarm verification. The PG9934P distinguishes between human beings and pets weighting up to 38 kg (85 lb) Target Specific Imaging™ and reduces false alarm by using True Motion Recognition™. Built-in link quality indicators reduce the installation time by eliminating the need for the installer to physically approach the control panel.
When the PG9934P is armed and the PIR sensor detects movement, the detector activates the camera, sends an alert to the PowerG alarm system and images are sent via ethernet or cellular to the monitoring station. The central monitoring station staff can then review the images to verify the alarm and respond accordingly. The PG9934P also operates in total darkness, making a fundamental tool to deliver visual alarm verification.
Please be advised that this product may record and transmit photographic images and audio recordings in the event of an alarm condition, and that such images and recordings may be activated remotely by a monitoring company or other third party with authorized access to the system to which this device is connected. It is responsibility fo the party installing the product to ensure that the installation, configuration and use of the product complies with applicable laws, including, without limitation, laws related to privacy, end user notifications and/or consent, posting of signage and registration of the applicable system with local privacy authorities. The product may be configured to limit the conditions under which the device will record, transmit or permit remote access to such photographic images and audio recordings.
With minimal installation time required, the PG9934P is easy for anyone to install. The compact design, wireless capability and battery power of this detector offers home and business owners more installation chices, including locations where wiring is difficult or impossible.
Product Features:
- Color or black/white images
- Auto-setup for brightness and contrast via the control panel
- Day and night CMOS camera, with IR illumination. This allow taking pictures in full darkness.
- Camera range of 12m (40ft); with IR illumination 10m (33ft)
- No vertical adjustment needed
- Auto-setup for brightness and contrast via the control panel
- Longer battery life - 3-5 years in typical use (depending on battery type)
- Battery compartment for easy battery replacement
- Installer-friendly with adjustment-free installation
- Front cover and back tamper
- Optional pet-tolerant model for animals up to 85 lb (38 kg)
- Low battery indication
- Visual alarm verification solution
- Long-life lithium batteries included
- Backed by DSC's 1-year limited manufacturer's warranty
Please Note: Unfortunately, AlarmClub is unable to provide alarm monitoring services for the PowerG PG9934P motion image detector.
DSC PG9934P Product Specifications:
- Dimensions: 4.9" x 2.5" x 2.4" (125mm x 63mm x 60mm)
- Weight (including battery): 200g (7 oz)
- Color: White
- Communication Protocol: PowerG
- Battery Life: 3 years (for typical use)
- Battery Type: 2 x 3V Lithium CR123A Battery (Panasonic or GP)
- Mounting Height: 1.8 to 2.1m (6 to 7ft)
- Camera Type: CMOS
- Camera Range: 12m (40ft) in daylight, 10m (33ft) in complete darkness
- Number of Curtain Beams: PG9934P: 18 far, 18 mid, 18 close
- Maximum Coverage: 12 x 12 m, (49 x 49 ft)/90°
- Color and Resolution: Color/Black and White:
QVGA (320 x 240 pixels)
QQVGA (160 x 120 pixels) - Frame Rate: Up to 2 frames per second
- Camera Angle: Wide angle 90° (overlaps PIR field of view)
- Maximum number of PIRCAMS: 10 (PG9934P and/orPG9944)
- Pet Immunity: Up to 38 kg (85 lb)
- Internal Battery: 6V Lithium Battery (two CR-123A 3V batteries or two CR17450 3V batteries, in series) or equivalent.
Note: For UL installations use Gold Peak (GP) only. Use only the above battery type. - Nominal Battery Capacity: 6V 1450mA/h (2xCR123A), 2200 mA/h (2xCR17450)
- Low Battery Threshold: 4.5 V
- Battery Life (for typical use): 4 to 5 years (CR123A) / 8 years (CR17450) not verified by UL/ULC
- True Motion Event Verification: 2 remote selections - 1 (OFF) or 2 (ON) motion events
- IR Illumination: 10 m (33 ft)
- Picture Resolution: 320 x 240 pixels QVGA
- Frame Rate: Up to 2 fps (for user)
- Alarm Period: 2 seconds
- Frequency Band: CE Listed PG4934(P): 433MHz; CE/EN Listed PG8934(P): 868MHz; FCC/IC/UL/ULC listed PG9934(P): 915MHz
- Supervision: Signaling at 4-min. intervals
- Tamper Alert: Reported when a tamper event occurs and in any subsequent message, until the tamper switch is restored.
- Mounting Height: 1.8 to 2.4m (6 to 8 feet). For PG9934P, the recommended height is up to 2.1 m (7 ft)
- Installation Options: Surface or corner
- PGBRACKET-1: Surface mounted swivel bracket, adjustable 30° down and 45° right
- PGBRACKET-2 : PGBRACKETR-1 with corner adapter
- PGBRACKET-3 : PGBRACKETR-1 with ceiling adapter
- RFI Protection: > -20 V/m up to 2000 MHz, excluding inband frequencies
- Operating Temperature: 14°F to 131°F (-10°C to 55°C) (UL/ULC only verified 0°C to 49°C
- Storage Temperature: 4°F to 140°F (-20°C to 60°C)
- Relative Humidity: up to 93% max. non condensing (UL/ULC verified max 85%)
- Compatible Receivers: 433 MHz Band: HSM2HOST4; HS2LC-DRF(P)4; HS2ICN9RF(P)4; PG4920
868 MHz Band: HSM2HOST8; HS2LCDRF(P)8; HS2IC-NRF(P)8, PG8920
912-919 MHz Band: HS2HOST9; HS2LCDRF(P)9; HS2IC-NRF(P); PG9920 - Approvals: UL 639, ULC-S306
DSC PG9934P Product Documents:
• DSC PG9934P Wireless PowerG Motion Detector with Integrated Camera- Datasheet
• DSC PG9934P Wireless PowerG Motion Detector - Installation and Operation Guide
DSC PG9934P LED Strength Indicators:
Visual Signal Strength:
- Green LED Blinks: STRONG
- Orange LED Blinks: GOOD
- Red LED Blinks: POOR
- No blinks: No Communication
Only GOOD or STRONG signal strengths are acceptable. If you receive a POOR signal from the device, re-locate it and re-test until a GOOD or STRONG signal is received.
DSC PG9934P Product Compatibility:
- DSC Iotega Control Panels
- DSC PowerSeries Neo Control Panels
- DSC PowerSeries Pro Control Panels
- Qolsys IQ Panel 2 Plus Control Panels
- Qolsys IQ Panel 4 Control Panels
- Qolsys IQ Hub Control Panels (Model Numbers: QS9301-0208-840, QS9302-0208-840)
- Qolsys IQ4 Hub Control Panels (Model Number: IQPH054)
