The Honeywell Home SiXSMOKE-CAN is a wireless combination heat/smoke detector with mounting hardware that is intended for use with the ProSeries or Lyric Controller that supports SiX-Series Canada wireless devices. In a matter of minutes, the SiXSMOKE-CAN can be programmed and enrolled into the Lyric Controller Canada (LCP500-LC) or ProSeries Canada (PROA7PLUSCN) all-in-one wireless touchscreen control panel. Due to its SiX-Series Sensor Lock feature, once enrolled, the SiXSMOKE-CAN smoke detector cannot be used with another panel until it is removed from the current controller. Each device has a unique MAC number located on the sticker on the unit.
Boasting an impressive 300-foot transmission range, you may place your smoke detector in those far away extra bedrooms from the SiX-Series panel. With a 300° detection pattern, the SiXSMOKE-CAN is designed not only to sense even low smoke conditions, but also heat temperature change conditions. The SiXSMOKE-CAN has tamper protection, to prevent anyone from deliberately tampering with the enclosure. There are also LED indicators on the smoke detector for visual sensor notifications of an alarm initiating event.
In addition to detecting smoke conditions, the SiXSMOKE-CAN also senses temperature raising above 135° F or greator and/or when there is a temperature increase of 15° F or greater within one minute time. The SiXSMOKE-CAN has a cover tamper to prevent tampering which has a 10 minute tamper timer that is reset every time the tamper switch is closed or opened or the detector cover is opened. With a supervision of 200 seconds, the SiXSMOKE-CAN constantly self checks that it is sending compatible signals to the SiX-Series control panel.
The smoke detector should be mounted on the ceiling or on the wall. Select a location within range of the control panel and mount the SiXSMOKE-CAN using the included mounting hardware. If programmed into the control panel, the SiXSMOKE-CAN can operate in the one-go-all-go mode, where all the smoke detectors programmed as one-go-all-go in the system will sound on alarm at the same time.
128-bit AES Encryption (SiX-Series)
Combination Smoke and Heat Detector
Built-in 85dB Audible Siren
360° Detection Pattern
One-Go-All Go: all heat/smoke/CO detectors in the system programmed as one-go-all-go will sound on alarm