5800SMOKEV - Resideo Honeywell Home Wireless Smoke/Heat Detector (for 345 MHz Control Panels)

5800SMOKEV - Resideo Honeywell Home Wireless Smoke/Heat Detector (for 345 MHz Control Panels)
5800SMOKEV - Resideo Honeywell Home Wireless Smoke/Heat Detector (for 345 MHz Control Panels)
Item# 5800SMOKEV
List Price: $152.52
Your Price: $101.68
Availability: In Stock

Resideo 5800SMOKEV Product Description:

The Resideo Honeywell Home 5800SMOKEV is a 3V lithium-powered, photoelectric multi-criteria detector that has a built-in wireless transmitter capable of detecting smoke, heat, rate-of-rise and low temperature.

The 5800SMOKEV meets UL 268 7th Edition requirements, which provides early detection, while also reducing nuisance alarms from everyday cooking. The 5800SMOKEV has improved detection of smoke from common synthetic materials found in many modern home furnishings, which typically burn faster and hotter.

This comprehensive detector is particularly ideal for hard-to-wire locations or where hazardous materials exist, and features a small, sleek design for locations where aesthetics are of utmost importance. The built-in sounder provides clear, audible annunciation during potential incidents and low battery conditions.

The 5800SMOKEV is compatible with any Resideo Security Control System that supports 5800 technology (VISTA®, LYNX, Lyric®, ProSeries) and utilizes either a 5800 style RF receiver or the PROTAKEOVER module.

Product Features:

  • Minimize Nuisance Alarms: Mathematical calculations smooth out short term spikes from dust/smoke and drift compensation adjusts the detector's sensitivity to minimize false alarms
  • Easy to Install: Sturdy, versatile mounting base and quick battery pull tabs allows for hassle-free installations
  • LED Status Indicators: Easily visible LEDs indicate power, sensor trouble, alarm and low battery status
  • Supports High/Low Maintenance: Monitors the smoke chamber and alerts when maintenance is needed
  • Quickly Check Unit Functionality: Easily accessible test button to check unit functionality
  • Residential and Commercial Applications: Meets both residential and commercial installation requirements
  • Smoke Detection: Alarms when smoke is detected
  • Heat Detection: Alarms when detected temperature is 135°F (57°C) or greater
  • Rate-of-Rise: Alarms when temperature is >104°F (40°C) @ 15°F/minute (8.33°C/minute)
  • Low Temperature Sensing: Senses ambient temperature and reports if temperature drops below 41°F (5°C)
  • Tamper Mode: Activates when the detector is removed from the mounting base or the tamper switch is closed and opened
  • Supervision: The detector will transmits its status every 60 to 70 minutes

Resideo 5800SMOKEV Product Specifications:

  • Dimensions (Diameter x Depth): 4.74 in x 2.31 in (120 mm x 59 mm)
  • Weight (without batteries): 5.8 oz (164 g)
  • Operating Temperature: 40°F to 100°F (4°C to 38°C)
  • Relative Humidity: 95&per; max., non-condensing
  • Fixed Temp Heat Detection: 135°F (57°C)
  • Rate-of-Rise Detection: > 104°F @ 15°F/min, (40°C @ 8.33°C/min)
  • Low Temperature Alert: 41°F (5°C)
  • RF Supervision Interval: 60 to 70 minutes
  • Installation Location: Indoor use only
  • Tamper Mode: Base
  • Sounder Output: 85 dBA at 10 ft (3 m)
  • Air Velocity, max: 1,000 ft/min (304.8 m/min)
  • Power Source: 3V CR123A lithium batteries (Qty 2)
  • Battery Life: 5 years (typical use)*
  • Operating Voltage: 2.5 to 3.6 V DC
  • Standby Current, max: 10 ?A
  • Alarm Current, max: 35 mA
  • Maximum Spacing: 50 ft x 50 ft (15 m x 15 m)
  • Approval Listings: FCC/IC, Conforms to UL 268 (7th edition), Certified to ULC S529, CSFM

Units are intended to be installed in accordance with NFPA 72

Resideo 5800SMOKEV Product Accessories:

COVERPLATE (sold separately)

  • Use when replacing an existing smoke or heat detector with a diameter larger than the 5800SMOKEV detector
  • Improves aesthetics by covering up any old paint color or holes from existing installs
  • Gasket minimizes airflow from larger holes and reduces the chance of stack effect that could interfere with detector performance
Q & A's :

comments powered by Disqus