The Alarm.com ADC-VDB770-S is a silver color, touchless, 1080p high definition, video doorbell camera with video analytics. The ADC-VDB770-S doorbell contains a built-in integrated camera, PIR motion sensor, digital microphone and speaker. It is the next-generation video doorbell camera and the latest installment in the Design Studio Series product line, has an expansive 150° vertical Field of View (FOV), allowing you to monitor the entire doorway area. With Two-Way Audio and a full portrait viewing in the app, the doorbell makes it easier than ever to see and speak with visitors. Plus, the ADC-VDB770-S uses video analytics to minimize false-positive motion detection and to enable rapid detection of people, so you receive alerts even if visitors don't ring the bell. With the ADC-VDB770-S installed do-it-yourselfer's will always know who is at the front door of their home. The ADC-VDB770-S enables homeowners the ability to answer the door and speak to visitors via two-way audio, right from their Alarm.com app.
Please note, the Customer app must be version 4.14+ to view video from the ADC-VDB770-S video doorbell. An Apple or Android device is required for use of the Alarm.com app. The AC or DC transformer or doorbell chime does not come included and needs to purchased separately.
Silver Color Finish
Expansive FOV (150° V, 115° H)
Full HD (1440 x 1920) video resolution
High dynamic range (HDR)
IR night vision
Video Analytics on the edge for faster, more relevant alerts
Live video and saved clip viewing
Two-Way Audio through the mobile app
Battery heater for low-temperature operation
2x2 antenna for improved Wi-Fi range
Compatible with existing doorbell transformers (requires 16-30 VAC, 10 VA)
LED Pattern "Solid Red": No local or Internet connection
LED Pattern "Blinking Red": Power on, camera booting
LED Pattern "Solid Green": Connected to Alarm.com
LED Pattern "Blinking Green": Local network connection
LED Pattern "Double-Blinking Blue": Unable to ring indoor chime
LED Pattern "Blinking Blue": WPS mode (press and hold button for 30-45s)
LED Pattern "Blinking White": WiFi Access point mode (press and hold button for 45-60s)
LED Pattern "Blinking Yellow": Camera power cycling (press and hold button for 60-75s)
LED Pattern "Alternating Red and Green": Camera resetting to factory default (press and hold button for >75s)
*Note: If the indoor chime is enabled for the device, holding down the button will trigger a single indoor chime immediately after being pressed. If desired, the indoor chime can be disabled through the Customer Website before pressing the button to initiate one of the above modes.
id:adc-vdb770-s-alarm-dot-com-video-doorbell-silver|image:https://s.turbifycdn.com/aah/yhst-39386722855626/adc-vdb770-s-alarm-com-wifi-1080p-touchless-video-doorbell-camera-in-silver-33.png|name:ADC-VDB770-S - Alarm.com WiFi 1080p Touchless Video Doorbell Camera (in Silver)|price:199.61|rating:0|brand:Alarm Dot Com|price:299.42|frequency:|installation:DIY Install|wired-zones:|wireless-zones:|color:|compatible:|network:|resolution:|monitoring-type:|property-type:|communication:|supervision-test:|interactive-app:|environment: