The Resideo Honeywell Home PROSiXMINI is a wireless miniature door/window alarm contact that is intended for use with control panels that support PROSiX-Series devices. The PROSiXMINI mini door/window contact is compatible with the ProSeries PROA7, ProSeries PROA7C, ProSeries Canada PROA7CN, ProSeries PROA7PLUS, ProSeries PROA7PLUSC or ProSeries Canada PROA7PLUSCN all-in-one wireless touchscreen control panels. The PROSiXMINI mini alarm contact should be placed on the doors and windows that you want to protect within 200 feet of the ProSeries panel. This form of perimeter protection provided by this wireless miniature alarm contact serves as the first line of defense against burglary intrusion.
The PROSiXMINI is simple to install and setup on either wood or steel doors/windows. The magnet gap should be no greater than 1.15 in. (29.21mm) on wooden doors/windows and no greater than 0.52 in. (13.21mm) on steel door/windows. When installing, please ensure that the magnet is aligned with the top of the sensor. Next, enroll the device in the ProSeries control panel by pulling the battery tab to activate (or use the magnet if the tab is removed). The LED flashes up to 20 seconds during enrollment. When done, the LED is ON for 3 seconds to confirm enrollment.
After enrolling, verify adequate signal signal strength by conducting a sensor test with the device in its intended mounting location. And, if necessary, adjust the device location and orientation. The signal strength can range between 1-4 green bars and the minimum required is 1 green bar for the zone being programmed. Four red bars indicated poor signal strength and the devices should be relocated.
128-bit AES Encryption (PROSiX-Series)
Transmission range up to 200 feet
Tamper Cover and Wall
Aesthetically pleasing miniature design (0.45" H x 1.25" W x 2.4" L)