PS15EMZ5-1 - 2GIG Z-Wave Smart Plug-In Home Appliance Module
PS15EMZ5-1 Product Description:
The 2GIG PS15EMZ5-1 is a smart plug-in EM home appliance module designed to be used with compatible Z-Wave control panels. Remotely control devices with the EM Appliance Module. Plug in the tea kettle, light or small appliance and activate it on a schedule, from your phone or Smart Switch. And with Energy Monitoring capability, know how Green your appliances are performing. It will also light your path with an integrated LED night light.
The PS15EMZ5-1 Plug-in Appliance Module is designed to provide Z-Wave control to a connected load. The PS15EMZ5-1 module is plugged into any standard grounded AC wall outlet, and the appliance or other device is then plugged into the module. Once connected, the appliance/device can be turned on or off remotely via the Z-Wave controller. The module contains two power receptacles - one controlled, and one pass-through (powered at all times).
This plug-in Appliance Module integrates with other Nortek Security & Control Z-Wave enabled products, and can also act as a wireless repeater to ensure that commands intended for another device in the network are received (useful when a device would otherwise be out of radio range).
Product Features:
- Energy Monitoring reports energy usage
- Does not impede 2nd outlet
- 15 Amp maximum capacity
- Z-Wave Plus
PS15EMZ5-1 Product Specifications:
- Signal (Frequency): 908.42 MHz
- Maximum Load Resistive: 15 amps (1800 watts) maximum, 120 VAC
- Maximum Load Motor: 1/2 H.P. maximum, 120 VAC
- Maximum Load Incandescent: 600W maximum, 120 VAC
- Range: Up to 100 feet line of sight between the wireless controller and/or the closest Z-Wave device
- Power Requirements: 120 VAC, 60 Hz
- Network wide inclusion
- One controlled and one pass-through outlet
- Security beaming
