Honeywell Home VISTA 20P Hardwired Cellular Security System Kit (for AT&T LTE Network)
Honeywell VISTA 20P Kit Description:
The Honeywell VISTA 20P kit is a hardwired cellular control panel which is used to replace existing "locked-out" of programming mode control panels. This VISTA 20P kit includes; control panel (VISTA 20P), control panel battery (IM-1250F1), control panel power transformer (I361-GT), programming keypad (6160), and cellular AT&T LTE alarm communicator (LTEM-XA).
Types of Property:
- Homes
- Small Businesses
- Townhomes
- Apartments/Condos
- Offices
- Retail Spaces
- Warehouses
- Convenience Stores
- Gas Stations
- Churches/Temples
*Please Note: Parts listed above require a subscription to Total Connect 2.0 services powered by AlarmClub.
Honeywell VISTA 20P Kit Documents:
- Data Sheet for Honeywell VISTA-20P Control Panel
- User Guide for Honeywell VISTA-20P Control Panel
- Quick Installation Guide for Honeywell VISTA-20P Control Panel
- Installation/Setup Guide for Honeywell VISTA-20P Control Panel
- Residential Sales Brochure for Honeywell VISTA Control Panel
- Commercial Sales Brochure for Honeywell VISTA Control Panel
- Comparison Chart for Honeywell VISTA Control Panel
- Programming Guide for Honeywell VISTA-20P Control Panel
- End User Brochure for Honeywell Alphanumeric Programming Alarm Keypad (6160)
- Sales Brochure for Honeywell Alphanumeric Programming Alarm Keypad (6160)
- Data Sheet for Honeywell Alphanumeric Programming Alarm Keypad (6160)
- Installation Guide for Honeywell Alphanumeric Programming Alarm Keypad (6160)
Honeywell VISTA 20P Kit Specifications:
- Supports four graphic touchscreen keypads
- Wireless keys can be programmed without using zones
- Eight on-board hardwired zones standard (15 when Zone Doubling feature is used)
-40 wireless expansion zones
-40 hardwire expansion zones - Two low current on-board trigger outputs
- 100 Event Log viewable at system keypads with time/date stamp
- 48 system user codes assignable to either partition
- Expandable to 48 total zones when used with hardwired and/or wireless expansion modules
- Two independent partitions plus a common partition
-Global Arming from any system keypad
-Go to function to view or operate one partition from the other
-Separate partition account numbers - 16 output devices
-Relays (Model 4204 Relay Modules, or 4229 Expansion Module) - Four installer-configurable zone types allows the installer to create custom zone types by assigning all zone attributes
- Supports four-wire and up to 16 two-wire smokes
-Works with Sentrol CleanMe™ maintenance signal - Multiple actions on output devices depending on system state
-Turns lights off when system arms
-Turns the same light on when system disarms
-Flashes same lights when system is in alarm - Built-in phone line cut monitor with programmable delay and annunciation options
-Display on system keypads
-Trigger local sounders
-Trigger system bell - Viewable on system keypads:
-Exit countdown
-Time and date display*
-Event log* - Auto keypad backlighting on entry
- Keyswitch arming
- Programmable macro buttons and single-button arming
- Supports a variety of wireless remote controls for single-button operation
- VIP Module allows system control from any touchtone phone
- Chime by zone
- User Scheduling
-Latchkey reports to pagers
-Auto arm/disarm
-"User access" time windows
*Please Note: Requires custom alpha keypad
Honeywell VISTA 20P Kit Includes:
(1) Honeywell VISTA 20P Hardwired Alarm Control Panel (VISTA-20P)
(1) Honeywell Cellular AT&T LTE Alarm Communicator (LTEM-XA)
(1) Honeywell Hardwired Programming Alarm Keypad (6160)
(1) UltraTech Sealed-Lead Acid Alarm Battery (IM-1250F1)
(1) Honeywell Plug-In Power Transformer (1361-GT)
Miscellaneous: User Manual
