The Resideo Honeywell Home PROINDMV is a wireless motionviewer detector that is intended for use with control panels that support PROSiX-Series devices. The PROINDMV motionviewer is compatible with the ProSeries PROA7, ProSeries PROA7C, ProSeries Canada PROA7CN, ProSeries PROA7PLUS, ProSeries PROA7PLUSC or ProSeries Canada PROA7PLUSCN all-in-one wireless touchscreen control panels. The PROINDMV motion detector is battery-operated device that includes an integrated PIR motion sensor, digital video camera and white flash illuminators. This wireless detector is powered by 3 CR123A Lithium batteries that provide up to 4 years of battery life.
After installed in a ProSeries security system, the PROINDMV can detects a potential intruder and record a short video clip enabling video alarm verification. The confirmation that an intrusion or other event is in progress can reduce false alarms and help achieve a faster, higher priorit response from first responders.
When the ProSeries system is armed and the motion detector senses motion anywhere within it's large 40' x 56' foot detection pattern, the camera captures up to a 10-second digital video segment. The alarm and video segment are reported via the control panel to the DIYer, in accordance with the system's configuration and programming.
The PROINDMV requires no wiring or remote power. Fully portable battery powered camera allows for flexibility in selecting adequate mounting locations. Programming and RF testing should be done while the device is in its intended mounting location to ensure good communication between the ProSeries control panel and the motionviewer. Mount indoors in a temperature-controlled environment at a mounting height of 7' 6" (2.3m) off the ground and where a pet cannot come within 6 feet (1.8m) of the sensor by climbing on furniture, stairs, boxes or other objects. Pet immunity is selectable, so it can be turned off or turned on up to 80 lbs. Remember to allow for a clear line-of-sight viewing all the areas that you want the PROINDMV to sense movement within. When picking the installation location, keep in mind not to face the motion sensor looking at glass windows and to avoid close proximity to moving fans or machinery, flourescent lights and heating/cooling sources. And, do not paint or cover the detection or camera lens.
After enrolling the PROINDMV motion detector, verify adequate signal strength by conducting a sensor test with the device in its intended mounting location. Adjust the device location and orientation as necessary. The PROINDMV can be mounted on the wall or in corners. The rear case/wall mount MUST be mounted to a stud, solid wood or with a robust wall anchor. Before mounting permanently conduct a sensor test by walking through the detection area in Walk Test mode and observing the LED. The system must be disarmed and the system can only be armed after exiting the Walk Test mode.
Motion-Activated Video - Captures video for transmission by a ProSeries panel for alarm verification purposes
Fast, Easy Installation - Completely wireless, with long-life lithium batteries
Large Coverage Area - 40' x 56' (12m x 17m) detection pattern
Fast Video Transfer - Helps expedite alarm verification and response
Night Vision - Captures images in little or no light with one white LED
Remote Sensitivity Adjustment - Saves time and reduces service calls
Strong Data Security - Two-Way AES encryption provides optimum signal integrity and security
Supervision - Transmits a periodic check-in/status signal to the ProSeries panel