PROSiXFOB - Resideo Honeywell Home Wireless Encrypted 4-Button Remote Alarm Keyfob (for ProSeries Control Panel)
ProSeries PROSiXFOB Product Description:
The Resideo Honeywell Home PROSiXFOB is a bi-directional wireless keyfob intended for use with the ProSeries PROA7, ProSeries PROA7C, ProSeries Canada PROA7CN, ProSeries PROA7PLUS, ProSeries PROA7PLUSC or ProSeries Canada PROA7PLUSCN all-in-one wireless touchscreen control panels. The PROSiXFOB can be used to control the ProSeries security system (e.g. arm, disarm the system); and receive system status information (armed status, not ready to arm, in alarm, in RF transmission mode, and more). You can press and release any key for system status.
The PROSiXFOB is simple to setup, just press and hold each button for 2 seconds to activate into the ProSeries control panel. For the two-button panic option, press and hold both buttons for 2 seconds. Keep in mind, that once enrolled in a system, the PROSiXFOB cannot be used with another controller until it is removed from the current controller. When removed from a system, the keyfob will revert to factory default settings. When the battery is low, the LED's do not flash during transmission and the battery must be replaced.
Product Features:
- 128-bit AES Encryption (PROSiX-Series)
- Transmission range up to 200 feet
- 2 year battery life
- Remote arming/disarming
- Panic button for emergencies
ProSeries PROSiXFOB Product Documents:
• ProSeries PROSiXFOB Wireless Remote 4-Button Alarm Keyfob - Data Sheet
• ProSeries PROSiXFOB Wireless Remote 4-Button Alarm Keyfob - Installation and Setup Guide
• ProSeries PROSiXFOB Wireless Remote 4-Button Alarm Keyfob - Quick Installation Guide
ProSeries PROSiXFOB Product Specifications:
- Dimensions (H x W x L): 0.4" x 1.4" x 2.5" (11mm x 36mm x 65mm)
- Transmission Range: 200 ft (61 meters) plus*
- Frequency: 2.4 GHz
- Battery Life: 2 Years (typical use)**
- Power Requirements: 3 volt, 210mAh; 2032 coin cell battery (Qty 1; Maxell CR2032, Duracell DL2032)
- Encryption: 128-bit AES
- LED Indicators: Yes
- Tamper Protected: No
- Operating Temperature: 32° to 122°F (0° to 50°C)
- Relative Humidity: 5-95%, non-condensing
- Agency Approvals: FCC/IC, ETL Listed to UL 1023 and UL 985, cETL Listed to ULC/ORD-C1023 and ULC-S545, UL 1635, UL1610
- Authorized Countries: US, Canada, Latin America
* Range can vary depending on building construction, wireless interference, and other factors.
**Battery life may vary by use.
