Quantcast
Home > Products > Hardwired Alarm Products > Control Panels > Honeywell Vista 20P Control Panel (Circuit Board Only)

Honeywell Vista 20P Control Panel (Circuit Board Only)

Honeywell Vista 20P Control Panel (Circuit Board Only)
Honeywell Vista 20P Control Panel (Circuit Board Only)
Item# V20PPCB
List Price: $183.58
Your Price: $122.39

Honeywell VISTA-20P Control Panel:


The Honeywell VISTA-20P control panel board only (V20PPCB) should be ordered, to swap-out the existing control panel that was already mounted inside an metal enclosure. The high capacity, feature-rich VISTA-20P control panel lets you deliver more value to your customers on each and every sale with up to 48 zones of protection, internet uploading/downloading, graphic keypad support and dual partitions. Honeywell's VISTA-20P gives you the ability to send alarm signals and upload/download via an Internet Protocol (IP), improving the speed at which information can be delivered to and from the control panel. In addition, the VISTA-20P, used with an AlarmNet® 7847i broadband internet, GSMV4G cellular 3/4G or iGSMV4G dual-path alarm communicator can be installed in premises without TELCO lines. The control panel's installation advantages, innovative end-user benefits and robust system capacity make the value-priced VISTA-20P an ideal choice for higher end installations.

The VISTA-20P control panel is backed by Honeywell's 2-year limited manufacturer's warranty and once upgraded with a Honeywell wireless alarm receiver is compatible with the full line of Honeywell 5800 series wireless security products. GEOARM and Honeywell give you the options you need to fully customize your DIY security system.

Product Features:

  • 2-Wire Smoke Detectors - 16 on Zone 1
  • 5800 RF Zone Expansion - 40 zones + 16 button zones
  • Alpha Keypad - 8 (Alpha and Fixed combined)
  • AUI Keypad Support - Up to 4
  • ECP Zone Expansion - 40 zones
  • Fixed Word Keypad - 8 (Alpha and Fixed combined)
  • Hardwired Zones - 8
  • Limitation of Access Schedules - 8
  • Partitionable - 2
  • User Codes - 48
  • Zone Doubling - Programmable - Zones 2-8
  • Zones Total - 48 + 16 button zones

Honeywell VISTA-20P Product Specifications:


•IP alarm reporting and uploading/ downloading capability for Internet and Intranet use via iGSMV4G, 7845i-ENT, GSMV4G or GSMX4G


•Supports four graphic touchscreen keypads


•Wireless keys can be programmed without using zones


•Eight on-board hardwired zones standard (15 when Zone Doubling feature is used)
  -40 wireless expansion zones
  -40 hardwire expansion zones


•Two low current on-board trigger outputs


•100 Event Log viewable at system keypads with time/date stamp


•48 system user codes assignable to either partition


•Expandable to 48 total zones when used with hardwired and/or wireless expansion modules


•Two independent partitions plus a common partition
  -Global Arming from any system keypad
  -Go to function to view or operate one partition from the other
  :-Separate partition account numbers


•16 output devices
  -Relays (Model 4204 Relay Modules, or 4229 Expansion Module)


•Four installer-configurable zone types allows the installer to create custom zone types by assigning all zone attributes


•Supports four-wire and up to 16 two-wire smokes
  -Works with Sentrol CleanMe™ maintenance signal


•Multiple actions on output devices depending on system state
  -Turns lights off when system arms
  -Turns the same light on when system disarms
  -Flashes same lights when system is in alarm


•Built-in phone line cut monitor with programmable delay and annunciation options
  -Display on system keypads
  -Trigger local sounders
  -Trigger system bell


•Viewable on system keypads:
  -Exit countdown
  -Time and date display*
  -Event log*


•Auto keypad backlighting on entry


•Keyswitch arming


•Programmable macro buttons and single-button arming


•Supports a variety of wireless remote controls for single-button operation


•VIP Module allows system control from any touchtone phone


•Chime by zone


•User Scheduling
  -Latchkey reports to pagers
  -Auto arm/disarm
  -"User access" time windows

*Requires custom alpha keypad

Q & A's : Honeywell Vista 20P Circuit Board Only


comments powered by Disqus