The GeoSOL is a outdoor solar panel designed to provide power to the GeoAlarm battery-operated security camera (GeoCAM) and/or the GeoAlarm battery-operated video doorbell camera (Geo-VDBC-B). With the GeoSOL installed, users can more easily setup the cameras and avoid having to run wires to provide power to the cameras in hard to install locations.
Designed for GeoCam Indoor/Outdoor Security Camera
1. Choose a location for the installation of your GeoSOL Solar Panel. The ideal location receives sunlight throughout most of the day. 2. Use the bracket as a guide and determine where the screws will be placed. Mark the location. 3. If installing into concrete, brick, or stucco, use a power drill and drill bit to make the holes for the screws. If installing into the wood, use a screwdriver and the included screws to start the holes. 4. Place the bracket onto the home, lining up the holes with the bracket. 5. Install the bracket using the included screws and tighten it. 6. Place the GeoSOL Solar Panel on the bracket, lining up the screw with the insert on the back of the Solar Panel. Twist the Solar panel to complete the bond, and twist the screw nut on the bracket to secure the Solar Panel in place. 7. Use the handle on the GeoSOL Solar Panel to adjust the angle to the desired position. 8. Now that your GeoSOL Solar Panel is installed, open the bottom cover on the Camera, and plug in the USB cable.