The GeoWFD is a wireless 433 MHz encrypted flood/freeze sensor which protects against costly water or temperature related damage. The GeoWFD detector is designed for indoor residential and light commercial use. When a flood or freeze alarm is triggered, the detector will then transmit an alarm notification to the GeoAlarm control panel (GeoCP), end-user, and/or AlarmClub central monitoring station informing everyone selected of an alarm initiating event. The GeoWFD is easily installed under sinks, near showers, tubs, toilets, dishwashers, fridge, washing machines, water heaters, basements, and other areas where water may accumulate or pool.
Encrypted 433 MHz Wireless Sensor
Detects wet, dry (Loop 1) or freeze (Loop 2) conditions
Transmits Tamper and Low Battery Alarms
Compatible with GeoAlarm smart security and automation panel
1. Take the screw cover of the sensor casing out using a screw driver for pulling out the hardware from the plastic casing. 2. Pulling out the screws from the plastic casing to change the battery. 3. Take the front cover out and pull out the cell battery as the picture. 4. Take the cell battery out using a screw driver for pulling out the cell battery as the picture.