The GeoVDBC-B is a next generation, battery-powered, wireless video doorbell camera that acts as your multi-functional doorkeeper, enabling you to receive notications of video doorbell alarm and home security event alarm, to make calls with visitors, to view real-time streaming or motion-triggered video and playback video clips. The GeoVDBC battery video doorbell is compatible with the GeoAlarm GeoCP control panel and can be used for either do-it-yourself and/or AlarmClub professional central monitoring station services.
Battery powered for a DIY friendly installation
Live view streaming via GeoAlarm Mobile App or GeoCP Security Panel
Two-way Audio through GeoAlarm Mobile App or GeoCP Security Panel
Security RF included (Connecting the complete ecosystem: Panel, Sensor, Doorbell)
Expansive Field of View: 202° (Horizontal) x 119° (Vertical)
Full HD 1920 x 1080 video resolution
2T2R Dual Band 2.4GHZ/5GHZ WIFI for improved WIFI range
On-Device AI (Instant analysis of each event and accurate reduction of false triggers)
Real Time Communication to anyone who approaches your door via 2-way Audio
Pre-Record Supported (Capture all actions in video clips to be stored at Amazon server)
As a Sensor to GeoCP Panel (Doorbell camera can send outdoor motion events to Panel)
Compatible with the Existing Doorbell Transformers (10-30VAC, 10VA)
*Normal Conditions: 3.5 month battery life is based on the assumption of 5 motion events in daytime, 2 motion events in nighttime, 1 remote wake-up daytime, 1 remote wake-up nighttime, and 5 false alarms from PIR.
1. Choose a location for the doorbell. The ideal height for your doorbell is 4ft above the ground. If you are replacing an existing doorbell, remove the doorbell and cover the tip of the wires to prevent touching. 2. Tuck in the wiring. 3. Use the mounting bracket as a guide and determine where the screws will be placed. Mark the location. 4. If installing into concrete, brick, or stucco, use a power drill and drill bit to make the holes for the screws. If installing into the wood, use a screwdriver and the included screws to start the holes. If the drill holes are too large, use the included screw anchors to provide the perfect fit. 5. Place the mounting bracket onto the home, lining up the holes with the mounting bracket. 6. Install the mounting bracket using the included screws and tighten it. 7. Grab your doorbell. 8. Locate the anchor on the front of the mounting bracket. 9. Attach the doorbell to the mounting bracket by placing the anchor into the square opening on the back of the doorbell. 10. Slide the doorbell downward to lock it in place. 11. Confirm the doorbell is flush with the mounting bracket. 12. Tighten the two screws on the bottom of the mounting bracket to secure the doorbell. Turn the screws to the right until tight but do not over-tighten.